Karen Davies Silicone Sugarcraft Mould - Santa Face Cupcake Top
Product Ref: 8021805
Santa face Cupcake top mould - 60mm
Ideal for Christmas cup cakes or as part of a larger Christmas Cake. A mould which, when turned out, covers your cupcake as well!
The mould is very flexible and easy to use.
Sprinkle cornflour into mould and then tap out the excess. (If you require a lustred finish, you could brush a lustre dust into the mould instead of cornflour!)
Press paste into mould ensuring that it goes into all the finer details of the mould. Ensure that the paste does not go over the edge of the mould (for neatness) and flatten the back. Any excess on the back may be taken out using a knife carefully from the centre to the outside – doing it this way won’t disturb the paste in the mould.
Turn mould over and release the paste from the mould.
May be coloured by dusting with dust or lustre dust colours, or painted by mixing in iso-propyl alcohol (Rejuvenator Spirit) with the dusts to make a paint.
Full instructions are given with the mould.
You will need a paste made from 1/2 sugar flower paste - (code 5962 is white) - and 1/2 sugarpaste - code (55122 is white) to make the moulded pieces.