This racecar cake is perfect for any racing fan's celebration cake.

Supply List
Expand all steps
You Will Need
8” Extra Deep Cake, masked ready for icing
Round Red Cake Drum Board 10” (06RRWD10)
Culpitt Cake Decorating Sugarpaste Icing–1kg-Brilliant White (0674227)
Cake Star White Modelling Paste-100g  (75001)
Cake Star Black Modelling Paste-100g   (75002)
Cake Star Red Modelling Paste-100g  (75013)
FMM Geometrical Cutter-Set of 10 (86257)
FMM Multi Ribbon Cutter (86258)
Cake Star Brush on Glue Pen-2ml (75154)
For the Cake

Cover your cake with the Brilliant white sugarpaste, smoothing and neatening the edges around the base.

Roll out some Red modelling paste and using the multi ribbon cutter, create two 3mm wide strips. Add some edible glue to the back of the strip and place one around the base of the cake.

Roll out some Black & White modelling paste and using the 40mm square cutter from the geometric set, cut out alternate colours to create a chequered effect (2 squares high).

Add the second Red strip around the top edge of the chequered squares.

For the Racecar Model
You will need:
Krispie Squares x 3 (or make your own)
Cake Star Red Modelling Paste-100g (75013) x2
Cake Star Black Modelling Paste-100g (75002)
Cake Star White Modelling Paste-100g (75001)
Cake Star Yellow Modelling Paste-100g (75133)
Colour Splash Edible Paint-Metallic Silver (75189)
You will need  modelling paste approximately as follows:

150g red / 60g black / 20g grey / 15g white / 15g yellow

Step 1

Cut krispies into required shapes and push together to stick.

Step 2

Take half the red modelling paste, roll out thinly and cover car shape.

Step 3

Neaten around bottom edge. Roll out other half of red paste and cover car with second layer.

Step 4

Reserve a little of the black paste. Take the remainder and divide into four for the wheels. Mark with a round cutter. Cut out a disc of white paste, make an indent in centre of wheel and stick the white disc into this. Add detailing. Paint centres with silver paint.

Step 5

Stick wheels onto car, along with a grey helmet, and aerodynamic pieces at the front and back. Either pipe, or make a very long thin ‘sausage’ of paste, to make a black outline around the car. Add further detailing if required.

Supply List
Related Guides